 
Connecting Indigenous  Knowledges to the classroom 
 
 

Experiment Procedure and Planner 
Cultural Burning 
Effect of FIRE on seed germination rate 
Student activities 
 

Photograph showing dry grass and twigs burning with bright orange flames and some blackened, charred areas.
 
Acknowledgement of Country 
CSIRO acknowledges the Traditional Owners of the lands, seas and waters of the area that we live and work on across Australia. We acknowledge all Aboriginal and Torres Strait Islander peoples and their continuing connection to their culture and pay our respects to Elders past and present. CSIRO is committed to reconciliation and recognises that Aboriginal and Torres Strait Islander peoples have made contributions to all aspects of Australian life including culture, economy and science. 
Artwork 
Meeting on Country, Shifting Sands by Aunty Sandra Angus  working with Saltwater People   2026. 
Aunty Sandra Angus is an acknowledged Elder and well respected Aboriginal leader in her community. She proudly identifies as an Australian Saltwater Murri with ancestral roots that extend to the Wiradjuri and Wongaibon people in NSW, the Ngarrindjeri people in SA and the Gunggari and Jaggera people in QLD. 
Meeting on Country, Shifting Sands by Aunty Sandra Angus working with Saltwater People  2026.

 
  
Contents 
Contents  ............................................................................................................................. 3 
Introduction  ............................................................................................................................. 4 
Experiment procedure 6 
How does exposure to fire affect the number of mulga Acacia aneura seeds that germinate? .... 6 
Experiment planner 9 
Cultural Burning - How does exposure to fire affect the number of mulga Acacia aneura seeds that germinate? ............................................................................................................................ 9 
Safety precautions ...................................................................................................................... 11 
Observations and results ............................................................................................................. 12 

  
 
Introduction 
Aboriginal and/or Torres Strait Islander Peoples across the land we now call Australia have used fire safely and effectively on Country for tens of thousands of years and is known as cultural burning. You might see the term fire-stick farming, which early researchers and colonists used to describe how Aboriginal and/or Torres Strait Islander Peoples managed land with fire. This term is not preferred by many Indigenous peoples and can make these practices seem simpler than they really are.  
Some of the way fire is used on Country are: 

 To maintain spiritual connections to Country 


 To clear Country 


 To protect sacred sites 


 Hunting 


 Cooking 


 To encourage particular plants to grow. 


In this experiment, you will explore how abiotic ecosystem factors (fire) can affect biotic ecosystem factors (plants), in particular you will experiment on native Acacia aneura seeds. 
This experiment takes place over three lessons  one to heat treat the seeds and one to prepare seedling trays and plant the treated and control seeds. You will then observe the seeds as they germinate (sprout). 
As you work through the experiment, consider: 
-
 Why would it be useful to encourage some plants to grow? 

-
 How has Cultural Burning helped keep Country healthy - in the past, and now?  

-
 How can Traditional Knowledges and technologies be combined with modern technologies to care for Country?  

-
 How does this experiment help you understand how ecosystem interactions? 


Safety note: This experiment involves controlled use of fire and potting media.  
 
Native seed - Acacia aneura (mulga wattle)  
A long-lived spreading tree or shrub that is highly resistant to drought and occupies about 20% of arid Australia. 
Aboriginal and Torres Strait Islander uses: 

 Food source: seeds are extremely nutritious and were roasted and ground into damper providing a high energy, high protein food source. Insect galls (mulga apple) can be eaten whole. 


 Honey ants  a delicious delicacy - live in holes under the mulga trees. 


 The sweet gum that oozes from the trunk is edible and could be sucked directly or used to sweeten drinks. 


 The dense wood was used for boomerangs, digging sticks, spears, clubs and shields.  


 In areas of drought the mulga provided shade, and water could sometimes be found in the tree hollows. 


 Wood could be used to make a drill stick for starting fire. 


 Shredded bark was used to line a childs cradle. 


 
  
Figure 1. Flowering Mulga Wattle  

Photograph of bright yellow fluffy flowers clustered on a curved brown tree branch with green leaves and a blurred blue and green background.
 
Experiment procedure  
How does exposure to fire affect the number of mulga Acacia aneura seeds that germinate? 
PART A  FIRE TREATMENT OF NATIVE SEEDS 
Equipment 

 Native seeds (Acacia aneura) 


 16 cm terracotta pot, labelled with seed species   


 Sand 


 Leaf litter and small twigs  


 Heatproof mat 


 Firestarter cube 


 Perti dish  


 Ruler  


 Measuring scales  


 Matches  


 Grey led pencil. 


Safety 

 Wear heat proof gloves and safety glasses when conducting the burn. 


 Remove all flammable materials from the work area. 


 Have fire bucket, fire blanket or fire extinguisher on hand. 


 Wear disposable gloves, mask for potting. 


 Wash hands thoroughly. 


Method 
1.
 Divide the seeds into two equal groups (treatment and control) and place in labelled petri dishes. 

2.
 Record how many seeds are in each group and describe their appearance in the Experiment planner. 

3.
 Set the control seeds aside in labelled petri dish. 

4.
 Measure 3cm, 4cm and 9cm from the bottom of the labelled terracotta pot/s using a ruler and mark with grey led pencil. Then, fill the labelled pot/s with sand up to the 3cm mark. 

5.
 Place the experimental seeds on top of the sand and cover up to the 4cm mark.  

6.
 Add leaf litter on top of the sand to the 9cm mark. 

7.
 Put a Firestarter cube in the centre of the pot. 

8.
 Place pot on the heatproof mat in a safe outdoor area. 

9.
 Light the Firestarter cube with the matches and allow the materials to burn completely (about 10 minutes). 

10.
 Record your observations during the burning in the Experiment planner. 

11.
 Leave the pot to cool overnight. 


PART B  PREPARE SEEDLING TRAYS 
Equipment 

 5L peat moss 


 5L vermiculite 


 Large tub  


 Mini greenhouse with seed tray  


 Metal ruler 


 Spoon 


 Measuring jug or cylinder 


 Tap water 


 Disposable gloves, safety glasses and mask - to avoid inhaling potting mix. 


Safety 

 Wear disposable gloves and mask for potting 


 Wash hands thoroughly after using potting media 


Method 
1.
 Mix 5L of peat moss with 5L of vermiculite in the large tub. 

2.
 Using the spoon fill each seedling tray with the peat moss mixture. 

3.
 Level the top of each cell with a ruler so the surface is flat. 

4.
 Pour 1L of tap water into the water tray. 

5.
 Place the seedling trays into the water tray and leave them for 30 minutes.  

6.
 Add another 400 mL of tap water to the water tray.


 
PART C  PLANT NATIVE SEEDS 
Equipment 

 Spoon 


 Sieve 


 Tray 


 Forceps 


 Petri dish  


 Prepared seedling trays 


 Labels  


 Permanent markers 


 Greenhouse. 


Method 
1.
 Carefully remove the ash from the top of the labelled pot and dispose. 

2.
 Scoop out the top layer of sand (approx. 2cm) into a sieve. 

3.
 Place a tray in the sink to catch the sand to prevent blocking the drain. 

4.
 Gently wash away the sand under running water to reveal the seeds. 

5.
 Using the forceps, transfer the cleaned seeds into a labelled petri dish. 

6.
 Count and describe the appearance of the fire-treated seeds, record this in the experiment planner. 

7.
 Plant 510 seeds per cell in seedling trays at a depth of 1 cm. 

8.
 Label each cell with species name, number of seeds planted and treatment. 

9.
 Repeat steps 6 to 8 with the untreated, control group of seeds. 

10.
 Cover the seedling trays with lids and close the vents. 

11.
 Place trays in a safe, dark area (like a cupboard or lab prep room) for two days. 

12.
 Move the trays to a bright area away from direct sunlight and open the greenhouse vents. 

13.
 Record observations of the seeds on the Experiment Planner, noting how many sprouts appear each day for the next 2-4 weeks. 


Analyse the Results 
Use the data and observations to determine the effect of fire on germination rates. Record your analysis in the Experiment planner. 
  
 
Experiment planner 
 
Cultural Burning - How does exposure to fire affect the number of mulga Acacia aneura seeds that germinate? 
 
Student name: 
  
 

Partners name/s: 
  
 


 
1. Experiment question. I am trying to find out... 
 
 
 
 


 
2. Hypothesis. I think... 
 
 
 
 


 
3. All the things that could affect this experiment are: 
Tick the correct answer/s from the options below. 
.Type of seed  
. Amount of heat produced  
. Amount of moisture   
. Amount of light   
. Depth seed planted  
. Seed treatment: fire, heat or smoke  
. Daily temperature  
. Type of planting mix  
4. The one thing (independent variable) I will change is 
 
 
 
 


 
5. I will measure (dependent variable): 
Tick the correct answer/s from the options below. 
. Appearance of seeds 
. Number of seeds which germinate (sprout) 
. Time it takes seeds to germinate (sprout) 
. Daily temperatures 
I will make my measurements using:  
 
 


 
6. The variables I will control 
Tick the correct answer/s from the options below.
. Type of seed 
. Amount of heat produced 
. Amount of moisture  
. Amount of light  
. Depth seed planted 
. Daily temperature 
. Type of planting mix. 
. Appearance of seeds 
. Number of seeds which germinate 
. Time it takes seeds to germinate
 
Safety precautions 
Add any additional safety precautions 
 
What 
 How 
 

Heat produced could cause burns 
 
 Wear proper PPE: Lab coat, safety glasses 


 Do not touch hot material 


 Wear heatproof gloves 


 
Other materials could catch on fire 
 
 Removal all flammable materials from the work area 


 Have fire bucket, fire blanket or fire extinguisher on hand 


 
Inhalation or contact with potting media can cause infections 
 
 Wear proper PPE, including mask and gloves 


 Dampen potting media before use to minimise dust 


 
 
 
  


 
 
 
  


 
 
 
  


 


 
  
 
Observations and results 
Before treatment  
 
 Number 
 Observations 
 

Treated seeds 
  
  
 


During fire treatment  
Record your observations during the burning. 
Observations 
 
 
 


Draw a labelled diagram of the burning experiment set up.  
 
 


After heat treatment  
Observations during 2-4 week wait 
 
 


Reflections and conclusions 
1.



 




 
2.



 




 
3.



 




 
4.



 




 
5.



 




 


 
  
As Australias national science agency, CSIRO is solving the greatest challenges through innovative science and technology. 
CSIRO.  Creating a better future for everyone. 
Contact us 
1300 363 400 
+61 3 9545 2176 
csiro.au/contact 
csiro.au 
For further information  
CSIRO Education and Outreach 
1300 363 400 
education@csiro.au 
csiro.au/education 
 
 
 
 
 
 
 

